Switch to the new Linux LTS release 6.12.3. Switch to U-Boot 2024.10 and
ATF 2.11. Force check of hashes for Linux kernel, headers, U-Boot, ATF.
Increase ext2 partition size to fit new software versions. Finally, add
BR2_TARGET_UBOOT_NEEDS_GNUTLS option required by new U-Boot.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Julien Olivain <ju.o@free.fr>
During the hackathon in Vienna, it was decided [0] to stop requiring
annotated defconfig files, and that they should all be regenerated.
This commit does just that.
This is a mechanical change, achieved by running (the defcfg script is
repriducedc at the end of the commit log):
$ for cfg in configs/*_defconfig; do
./defcfg "${cfg##*/}" || break
done
Out of our 302 defconfig files, only 247 needed regenerating, which
means that about 1 in 5 was already not providing the requested
annotations.
To be noted: three defconfig files had duplicate definitions, which this
commit resolves:
nitrogen6sx_defconfig
nitrogen7_defconfig
olimex_a33_olinuxino_defconfig
warning: override: reassigning to symbol BR2_PACKAGE_HOST_UBOOT_TOOLS
[0] https://elinux.org/Buildroot:DeveloperDaysELCE2024#Rules_for_defconfigs
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
====
Below is the script to reproduce the commmit. What it does is regenerate
the configuration first, then applies a patch to update kernel headers
to 3.11, and then recalls the defconfig again, and finally verifies that
the 3.11 headers are not selected (and ignores whether the latest are
selected or not): we want to catch whether defconfig that were using
3.10, currently the latest we support, would stioll get those headers
after we regeerate those.
--->8------>8------>8------>8------>8---
#!/bin/sh
cfg="${1}"
git checkout -- package/linux-headers/Config.in.host toolchain/Config.in
make "${cfg}"
make savedefconfig
patch -p1 <<_EOF_
diff --git a/package/linux-headers/Config.in.host b/package/linux-headers/Config.in.host
index 2ae4077ffe..e669f89267 100644
--- a/package/linux-headers/Config.in.host
+++ b/package/linux-headers/Config.in.host
@@ -129,8 +129,12 @@ choice
If your kernel headers are more recent than the latest version
in the choice, then select the latest version.
+config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_11
+ bool "6.11.x or later"
+ select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11
+
config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_10
- bool "6.10.x or later"
+ bool "6.10.x"
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10
config BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_9
diff --git a/toolchain/Config.in b/toolchain/Config.in
index 6e91ab756c..c2522aca7f 100644
--- a/toolchain/Config.in
+++ b/toolchain/Config.in
@@ -656,6 +656,10 @@ config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9
config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10
bool
select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9
+
+config BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11
+ bool
+ select BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10
select BR2_TOOLCHAIN_HEADERS_LATEST
# This should be selected by the latest version, above, to indicate that
@@ -669,6 +673,7 @@ config BR2_TOOLCHAIN_HEADERS_LATEST
# stops affecting a value on the first matching default.
config BR2_TOOLCHAIN_HEADERS_AT_LEAST
string
+ default "6.11" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_11
default "6.10" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_10
default "6.9" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_9
default "6.8" if BR2_TOOLCHAIN_HEADERS_AT_LEAST_6_8
_EOF_
make "${cfg}"
git checkout -- package/linux-headers/Config.in.host toolchain/Config.in
diff="$(
diff -I '_6_11\|BR2_TOOLCHAIN_HEADERS_LATEST=y' -du \
<( tail -n +5 .config.old ) \
<( tail -n +5 .config )
)"
if [ "${diff}" ]; then
printf 'Not idempotent for "%s"\n' "${cfg}" >&2
exit 1
fi
---8<------8<------8<------8<------8<---
====
To verify that no other changes are made to the defconfigs that are
risky when the defaults change, we ran the following simple script
(where buildroot-prev is a checkout just before this commit). It shows
that there are many settings removed because they are default, but none
of them run the same risk that the default is going to be changed in the
future.
for i in configs/*_defconfig; do
diff="$(diffconfig ../buildroot-next/$i $i)"
if [ -n "$diff" ]; then
echo "==> $i"
echo "$diff"
echo
fi
done
--->8------>8------>8------>8------>8---
==> configs/aarch64_efi_defconfig
-BR2_TARGET_GRUB2_ARM64_EFI y
==> configs/acmesystems_aria_g25_128mb_defconfig
-BR2_arm926t y
==> configs/acmesystems_aria_g25_256mb_defconfig
-BR2_arm926t y
==> configs/acmesystems_arietta_g25_128mb_defconfig
-BR2_arm926t y
==> configs/acmesystems_arietta_g25_256mb_defconfig
-BR2_arm926t y
==> configs/amarula_vyasa_rk3288_defconfig
-BR2_PACKAGE_HOST_UBOOT_TOOLS y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/armadeus_apf27_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
-BR2_arm926t y
==> configs/armadeus_apf28_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
-BR2_arm926t y
==> configs/armadeus_apf51_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
==> configs/aspeed_ast2600evb_defconfig
-BR2_ARM_FPU_VFPV4D16 y
==> configs/asus_tinker-s_rk3288_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/at91sam9260eknf_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
-BR2_arm926t y
==> configs/at91sam9g20dfc_defconfig
-BR2_TARGET_ROOTFS_TAR y
-BR2_TARGET_ROOTFS_UBIFS y
-BR2_TARGET_ROOTFS_UBIFS_LEBSIZE 0x1f800
-BR2_TARGET_ROOTFS_UBIFS_MINIOSIZE 0x800
-BR2_TARGET_ROOTFS_UBI_PEBSIZE 0x20000
-BR2_TARGET_ROOTFS_UBI_SUBSIZE 512
-BR2_arm926t y
==> configs/at91sam9g45m10ek_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
-BR2_arm926t y
==> configs/at91sam9rlek_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
-BR2_arm926t y
==> configs/at91sam9x5ek_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
-BR2_arm926t y
==> configs/at91sam9x5ek_dev_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
-BR2_arm926t y
==> configs/at91sam9x5ek_mmc_defconfig
-BR2_arm926t y
==> configs/at91sam9x5ek_mmc_dev_defconfig
-BR2_arm926t y
==> configs/atmel_sama5d3_xplained_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
==> configs/atmel_sama5d3_xplained_dev_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
==> configs/atmel_sama5d3xek_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
==> configs/atmel_sama5d4_xplained_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
==> configs/atmel_sama5d4_xplained_dev_defconfig
-BR2_TARGET_ROOTFS_UBIFS y
==> configs/bananapi_m2_ultra_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/bananapro_defconfig
-BR2_ARM_EABIHF y
-BR2_LINUX_KERNEL_USE_DEFCONFIG y
-BR2_TARGET_GENERIC_GETTY y
-BR2_TARGET_UBOOT_FORMAT_BIN y
==> configs/beaglebone_qt5_defconfig
-BR2_PACKAGE_TI_SGX_KM y
-BR2_TOOLCHAIN_BUILDROOT_GLIBC y
==> configs/beagleboneai64_defconfig
-BR2_TARGET_TI_K3_BOOT_FIRMWARE y
-BR2_TARGET_UBOOT_NEEDS_PYLIBFDT y
==> configs/beelink_gs1_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/canaan_kd233_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
==> configs/ci20_defconfig
-BR2_KERNEL_HEADERS_AS_KERNEL y
-BR2_PACKAGE_HOST_UBOOT_TOOLS y
-BR2_TARGET_UBOOT_SPL_NAME "spl/u-boot-spl.bin"
==> configs/cubieboard2_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/freescale_imx28evk_defconfig
-BR2_arm926t y
==> configs/friendlyarm_nanopi_r2s_defconfig
-BR2_cortex_a53 y
==> configs/globalscale_espressobin_defconfig
-BR2_cortex_a53 y
==> configs/hifive_unleashed_defconfig
-BR2_LINUX_KERNEL_IMAGE y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
-BR2_TARGET_GENERIC_GETTY y
==> configs/imx23evk_defconfig
-BR2_arm926t y
==> configs/imxrt1050-evk_defconfig
-BR2_LINUX_KERNEL_ZIMAGE y
==> configs/khadas_vim3_defconfig
-BR2_PACKAGE_HOST_AMLOGIC_BOOT_FIP_DEVICE "khadas-vim3"
==> configs/kontron_bl_imx8mm_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31_BIN y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
-BR2_cortex_a53 y
==> configs/kontron_pitx_imx8m_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_TARGET_UBOOT_NEEDS_ATF_BL31_BIN y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/kontron_smarc_sal28_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/lafrite_defconfig
-BR2_cortex_a53 y
==> configs/lego_ev3_defconfig
-BR2_TARGET_GENERIC_GETTY y
-BR2_arm926t y
==> configs/linksprite_pcduino_defconfig
-BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y
-BR2_TARGET_GENERIC_GETTY y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/ls1046a-frwy_defconfig
-BR2_PACKAGE_QORIQ_FM_UCODE_PLATFORM "ls1046"
==> configs/mx6cubox_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/nexbox_a95x_defconfig
-BR2_cortex_a53 y
==> configs/nitrogen6sx_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/nitrogen6x_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/nitrogen7_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/nitrogen8m_defconfig
-BR2_TARGET_GENERIC_GETTY y
-BR2_cortex_a53 y
==> configs/nitrogen8mm_defconfig
-BR2_TARGET_GENERIC_GETTY y
-BR2_cortex_a53 y
==> configs/nitrogen8mn_defconfig
-BR2_TARGET_GENERIC_GETTY y
-BR2_cortex_a53 y
==> configs/nitrogen8mp_defconfig
-BR2_TARGET_GENERIC_GETTY y
-BR2_cortex_a53 y
==> configs/odroidc2_defconfig
-BR2_TARGET_UBOOT_BUILD_SYSTEM_LEGACY y
==> configs/olimex_a10_olinuxino_lime_defconfig
-BR2_LINUX_KERNEL_USE_DEFCONFIG y
-BR2_TARGET_GENERIC_GETTY y
-BR2_TARGET_UBOOT_FORMAT_BIN y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/olimex_a13_olinuxino_defconfig
-BR2_LINUX_KERNEL_USE_DEFCONFIG y
-BR2_TARGET_GENERIC_GETTY y
-BR2_TARGET_UBOOT_FORMAT_BIN y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/olimex_a20_olinuxino_lime2_defconfig
-BR2_ARM_EABIHF y
-BR2_LINUX_KERNEL_USE_DEFCONFIG y
-BR2_PACKAGE_SUNXI_MALI_UTGARD_DRIVER y
-BR2_TARGET_GENERIC_GETTY y
-BR2_TARGET_UBOOT_FORMAT_BIN y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
-BR2_TOOLCHAIN_BUILDROOT_GLIBC y
==> configs/olimex_a20_olinuxino_lime_defconfig
-BR2_ARM_EABIHF y
-BR2_LINUX_KERNEL_USE_DEFCONFIG y
-BR2_PACKAGE_SUNXI_MALI_UTGARD_DRIVER y
-BR2_TARGET_GENERIC_GETTY y
-BR2_TARGET_UBOOT_FORMAT_BIN y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
-BR2_TOOLCHAIN_BUILDROOT_GLIBC y
==> configs/olimex_a20_olinuxino_micro_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/olimex_a33_olinuxino_defconfig
-BR2_LINUX_KERNEL_USE_DEFCONFIG y
-BR2_TARGET_GENERIC_GETTY y
-BR2_TARGET_UBOOT_FORMAT_BIN y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/olimex_a64_olinuxino_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
-BR2_cortex_a53 y
==> configs/olimex_imx233_olinuxino_defconfig
-BR2_arm926t y
==> configs/openblocks_a6_defconfig
-BR2_arm926t y
==> configs/orangepi_lite2_defconfig
-BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_cortex_a53 y
==> configs/orangepi_one_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/orangepi_one_plus_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_cortex_a53 y
==> configs/orangepi_pc_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/orangepi_pc_plus_defconfig
-BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/orangepi_r1_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/orangepi_zero2w_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
-BR2_cortex_a53 y
==> configs/orangepi_zero3_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
-BR2_cortex_a53 y
==> configs/orangepi_zero_defconfig
-BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/orangepi_zero_plus2_defconfig
-BR2_PACKAGE_WPA_SUPPLICANT_NL80211 y
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
-BR2_cortex_a53 y
==> configs/orangepi_zero_plus_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
-BR2_cortex_a53 y
==> configs/pine64_defconfig
-BR2_cortex_a53 y
==> configs/pine64_sopine_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_cortex_a53 y
==> configs/qemu_aarch64_sbsa_defconfig
-BR2_TARGET_GRUB2_ARM64_EFI y
==> configs/qemu_aarch64_virt_defconfig
-BR2_cortex_a53 y
==> configs/qemu_arm_versatile_defconfig
-BR2_arm926t y
==> configs/qemu_arm_vexpress_defconfig
-BR2_ARM_FPU_VFPV3D16 y
==> configs/qemu_arm_vexpress_tz_defconfig
-BR2_PACKAGE_LIBOPENSSL y
==> configs/qemu_m68k_mcf5208_defconfig
-BR2_LINUX_KERNEL_VMLINUX y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_m68k_q800_defconfig
-BR2_LINUX_KERNEL_VMLINUX y
-BR2_TARGET_GENERIC_GETTY y
-BR2_m68k_68040 y
==> configs/qemu_microblazebe_mmu_defconfig
-BR2_microblaze y
==> configs/qemu_microblazeel_mmu_defconfig
-BR2_microblaze y
==> configs/qemu_mips32r2_malta_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_mips32r2el_malta_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_mips32r6_malta_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_mips32r6el_malta_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_mips64_malta_defconfig
-BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_mips64el_malta_defconfig
-BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_mips64r6_malta_defconfig
-BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_mips64r6el_malta_defconfig
-BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_ppc64le_powernv8_defconfig
-BR2_powerpc_power8 y
==> configs/qemu_ppc64le_pseries_defconfig
-BR2_powerpc_power8 y
==> configs/qemu_ppc_bamboo_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_ppc_g3beige_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_ppc_mpc8544ds_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_riscv32_nommu_virt_defconfig
-BR2_LINUX_KERNEL_IMAGE y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_riscv32_virt_defconfig
-BR2_LINUX_KERNEL_IMAGE y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_riscv64_nommu_virt_defconfig
-BR2_LINUX_KERNEL_IMAGE y
-BR2_RISCV_64 y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_riscv64_virt_defconfig
-BR2_LINUX_KERNEL_IMAGE y
-BR2_RISCV_64 y
-BR2_TARGET_GENERIC_GETTY y
==> configs/qemu_sh4_r2d_defconfig
-BR2_sh4 y
==> configs/qemu_sparc64_sun4u_defconfig
-BR2_sparc_v9 y
==> configs/qemu_sparc_ss10_defconfig
-BR2_sparc_v8 y
==> configs/qemu_x86_defconfig
-BR2_i386 y
==> configs/raspberrypi0_defconfig
-BR2_ARM_EABIHF y
==> configs/raspberrypi0w_defconfig
-BR2_ARM_EABIHF y
==> configs/raspberrypi2_defconfig
-BR2_ARM_EABIHF y
==> configs/raspberrypi3_64_defconfig
-BR2_cortex_a53 y
==> configs/raspberrypi3_qt5we_defconfig
-BR2_PACKAGE_KMOD y
-BR2_PACKAGE_QT5BASE_JPEG y
-BR2_PACKAGE_QT5BASE_PNG y
-BR2_TOOLCHAIN_BUILDROOT_GLIBC y
==> configs/raspberrypi_defconfig
-BR2_ARM_EABIHF y
==> configs/riotboard_defconfig
-BR2_TARGET_GENERIC_GETTY y
==> configs/rock64_defconfig
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/rock_pi_n8_defconfig
-BR2_LINUX_KERNEL_USE_DEFCONFIG y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/rockpro64_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31 y
-BR2_TARGET_UBOOT_NEEDS_PYTHON3 y
==> configs/s6lx9_microboard_defconfig
-BR2_microblaze y
==> configs/sheevaplug_defconfig
-BR2_TARGET_GENERIC_GETTY y
-BR2_TARGET_UBOOT_NETWORK n
-BR2_arm926t y
==> configs/sipeed_maix_bit_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
==> configs/sipeed_maix_bit_sdcard_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
-BR2_TARGET_UBOOT_FORMAT_BIN y
==> configs/sipeed_maix_dock_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
==> configs/sipeed_maix_dock_sdcard_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
-BR2_TARGET_UBOOT_FORMAT_BIN y
==> configs/sipeed_maix_go_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
==> configs/sipeed_maix_go_sdcard_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
-BR2_TARGET_UBOOT_FORMAT_BIN y
==> configs/sipeed_maixduino_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
==> configs/sipeed_maixduino_sdcard_defconfig
-BR2_BINFMT_FLAT y
-BR2_RISCV_64 y
-BR2_RISCV_ABI_LP64D y
-BR2_TARGET_UBOOT_FORMAT_BIN y
==> configs/snps_archs38_hsdk_defconfig
-BR2_TOOLCHAIN_BUILDROOT_GLIBC y
==> configs/solidrun_clearfog_gt_8k_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP n
==> configs/solidrun_macchiatobin_defconfig
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_SSP n
-BR2_TARGET_ROOTFS_TAR y
-BR2_TARGET_UBOOT_USE_DEFCONFIG y
==> configs/spike_riscv64_defconfig
-BR2_RISCV_64 y
==> configs/ts5500_defconfig
-BR2_i386 y
-BR2_x86_i586 y
==> configs/versal_vck190_defconfig
-BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
==> configs/versal_vpk180_defconfig
-BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
==> configs/zynqmp_kria_kd240_defconfig
-BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
==> configs/zynqmp_kria_kr260_defconfig
-BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
==> configs/zynqmp_kria_kv260_defconfig
-BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
==> configs/zynqmp_zcu102_defconfig
-BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
==> configs/zynqmp_zcu104_defconfig
-BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
==> configs/zynqmp_zcu106_defconfig
-BR2_TARGET_XILINX_PREBUILT_VERSION "xilinx_v2024.1"
---8<------8<------8<------8<------8<---
Switch to the new Linux LTS release 6.6.3. Switch to the latest
U-Boot 2023.10 and ATF 2.9. Increase ext2 partition size to fit
new versions.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump Linux kernel to 6.1.14, U-Boot to 2023.01, ATF to 2.8.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Switch to extlinux instead of U-Boot boot script. Drop custom boot
script and genimage config. Instead use common orangepi files from
board/orangepi/common. To help extlinux to find DTB without U-Boot
environment changes, do not strip arm64 board specific directory
from DTB name when installing it in /boot directory. For this
purpose use BR2_KERNEL_DTB_KEEP_DIRNAME config option. Finally,
tidy up configuration file adding section names.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump Linux kernel to 5.16.1 and U-Boot to 2022.01. Select option
BR2_TARGET_UBOOT_NEEDS_OPENSSL since U-Boot requires openssl.
Root filesystem does not fit into default 60M anymore,
so increase its size.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot and Linux kernel versions. Updating U-Boot to 2021.04
requires the following two changes.
First, after switching to binman, u-boot.itb is no more generated for
64-bit sunxi boards. Combined u-boot-sunxi-with-spl.bin image should
be used instead. This image contains SPL, U-Boot, and FIT image,
where FIT image contains other binaries such as BL31 and SCP.
Second, new U-Boot enables support for System Control Processor (SCP)
firmware. SCP firmware is included by default into FIT image in the
combined u-boot-sunxi-with-spl.bin binary. When SCP is not available
or not needed, it should be explicitly disabled by pointing to an
empty file. Support for Allwinner SCP firmware is not yet available
neither in Buildroot nor in mainline kernel. So disable it for now
using custom U-Boot build options.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Switch to mainline TF-A that provides basic support for H5 and A64.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Patch that pins mmc indexes was not accepted to mainline kernel. Drop that
patch and switch to GPT to use partition labels. For GPT the name of the
partition in genimage.cfg is used as the label for that partition. Note
that the default GPT partition table location conflicts with the SPL
location, so move GPT table after bootloaders.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump Linux to 5.10.10 and U-Boot to 2020.10. In the new kernel sunxi-mmc
driver has been switched to asynchronous probe. As a result, mmc indexes
can be shuffled breaking board boot. Add patch that pins mmc indexes to
their original ordered values.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For defconfigs that create a boot script, add the host package
uboot-tools and update the script variable names.
Add BR2_PACKAGE_HOST_UBOOT_TOOLS=y just before the existing
BR2_TARGET_UBOOT_BOOT_SCRIPT option. Note that for the defconfigs that
are not manually formatted (i.e. just the result of 'make
savedefconfig'), this puts them in the wrong place. However, it's easier
this way, and it's more consistent in general to have the definition of
the script close to BR2_TARGET_UBOOT itself.
Special cases:
- nanopi_* had the definition of the _SCRIPT variable in a weird place.
These are moved to close to BR2_TARGET_UBOOT.
- Same for orangepi_plus.
- orangpi_pc_* already had BR2_PACKAGE_HOST_UBOOT_TOOLS=y so it's not
added there.
Related to db2b684126
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When building U-Boot for this platform:
unable to execute 'swig': No such file or directory
error: command 'swig' failed with exit status 1
scripts/dtc/pylibfdt/Makefile:26: recipe for target 'scripts/dtc/pylibfdt/_libfdt.so' failed
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/123771103
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump linux as well headers to v4.16 version, this eventually drop the
wifi patch since it has been merged to Linux v4.16.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Orange-Pi Zero Plus2 board has AP6212 WiFi/BT combo, but does
not have ethernet port. So it makes sense to enable wireless
networking by default:
- add DTS patch enabling AP6212 WiFi/BT combo support
-- this patch is on its way to mainline Linux v4.16
- enable WiFi support in kernel config
- enable Broadcom brcmfmac kernel driver in kernel config
- add Broadcom wireless firmware package to image
- add basic wireless tools to image
- add mdev to image to enable module autoloading
- add rootfs overlay with proper NVRAM file for on-board AP6212 chip
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump versions:
- use U-Boot 2008.01
- use Linux kernel v4.15.2
Drop patch with dts sdcard fix since it has been
merged to Linux v4.15.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for Orangepi Zero Plus2
board with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot
Cc: zhaoyifan <zhao_steven@263.net>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
