diff --git a/.checkpackageignore b/.checkpackageignore index 1a885e1b7a..dea17e02e4 100644 --- a/.checkpackageignore +++ b/.checkpackageignore @@ -28,7 +28,6 @@ board/freescale/common/mxs/post-image.sh Shellcheck board/friendlyarm/nanopi-r2s/post-build.sh Shellcheck board/hardkernel/odroidc2/post-image.sh Shellcheck board/hardkernel/odroidc2/rootfs_overlay/etc/init.d/S09modload Shellcheck lib_sysv.Variables -board/hardkernel/odroidxu4/post-image.sh Shellcheck lib_shellscript.EmptyLastLine board/kontron/bl-imx8mm/post-build.sh Shellcheck board/kontron/smarc-sal28/post-build.sh Shellcheck board/lego/ev3/post-image.sh Shellcheck @@ -166,7 +165,6 @@ configs/nitrogen8mm_defconfig lib_defconfig.ForceCheckHash configs/nitrogen8mn_defconfig lib_defconfig.ForceCheckHash configs/nitrogen8mp_defconfig lib_defconfig.ForceCheckHash configs/odroidc2_defconfig lib_defconfig.ForceCheckHash -configs/odroidxu4_defconfig lib_defconfig.ForceCheckHash configs/olimex_a10_olinuxino_lime_defconfig lib_defconfig.ForceCheckHash configs/olimex_a13_olinuxino_defconfig lib_defconfig.ForceCheckHash configs/olimex_a20_olinuxino_micro_defconfig lib_defconfig.ForceCheckHash diff --git a/DEVELOPERS b/DEVELOPERS index 38eeafc59d..1df5b17ba1 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2764,10 +2764,6 @@ F: package/liburcu/ N: Philippe Reynes F: package/ibm-sw-tpm2/ -N: Pierre Crokaert -F: board/hardkernel/odroidxu4/ -F: configs/odroidxu4_defconfig - N: Pierre Ducroquet F: package/kf5/ diff --git a/board/hardkernel/odroidxu4/boot.ini b/board/hardkernel/odroidxu4/boot.ini deleted file mode 100644 index 87ac7ac135..0000000000 --- a/board/hardkernel/odroidxu4/boot.ini +++ /dev/null @@ -1,38 +0,0 @@ -ODROIDXU-UBOOT-CONFIG - -# U-Boot Parameters -setenv initrd_high "0xffffffff" -setenv fdt_high "0xffffffff" - -setenv macaddr "00:1e:06:61:7a:39" -setenv bootrootfs "console=tty1 root=/dev/mmcblk1p2 rootwait rw fsck.repair=yes net.ifnames=0" -setenv bootcmd "load mmc 0:1 0x40008000 zImage; load mmc 0:1 0x44000000 exynos5422-odroidxu4.dtb; bootz 0x40008000 - 0x44000000" -setenv vout "hdmi" -setenv governor "performance" -setenv HPD "true" - -# TMDS data amplitude control. -setenv hdmi_tx_amp_lvl "31" - -# TMDS data amplitude fine control for each channel. -setenv hdmi_tx_lvl_ch0 "3" -setenv hdmi_tx_lvl_ch1 "3" -setenv hdmi_tx_lvl_ch2 "3" - -# TMDS data pre-emphasis level control. -setenv hdmi_tx_emp_lvl "6" - -# TMDS clock amplitude control. -setenv hdmi_clk_amp_lvl "31" - -# TMDS data source termination resistor control. -setenv hdmi_tx_res "0" - -setenv hdmi_phy_control "hdmi_tx_amp_lvl=${hdmi_tx_amp_lvl} hdmi_tx_lvl_ch0=${hdmi_tx_lvl_ch0} hdmi_tx_lvl_ch1=${hdmi_tx_lvl_ch1} hdmi_tx_lvl_ch2=${hdmi_tx_lvl_ch2} hdmi_tx_emp_lvl=${hdmi_tx_emp_lvl} hdmi_clk_amp_lvl=${hdmi_clk_amp_lvl} hdmi_tx_res=${hdmi_tx_res} HPD=${HPD} vout=${vout}" - -# final boot args -setenv bootargs "${bootrootfs} ${videoconfig} smsc95xx.macaddr=${macaddr} governor=${governor} ${hdmi_phy_control}" - -# Boot the board -boot - diff --git a/board/hardkernel/odroidxu4/genimage.cfg b/board/hardkernel/odroidxu4/genimage.cfg deleted file mode 100644 index 0a90d6be50..0000000000 --- a/board/hardkernel/odroidxu4/genimage.cfg +++ /dev/null @@ -1,55 +0,0 @@ -image boot.vfat { - vfat { - files = { - "boot.ini", - "zImage", - "exynos5422-odroidxu4.dtb" - } - } - - size = 32M -} - -image sdcard.img { - hdimage { - } - - partition bl1 { - in-partition-table = "no" - image = "bl1.bin.hardkernel" - offset = 512 - size = 15K - } - - partition bl2 { - in-partition-table = "no" - image = "bl2.bin.hardkernel.720k_uboot" - offset = 15872 # 15KB + 512B - size = 16K - } - - partition u-boot { - in-partition-table = "no" - image = "u-boot-dtb.bin" - offset = 32256 # 31KB + 512B - size = 720K - } - - partition tzsw { - in-partition-table = "no" - image = "tzsw.bin.hardkernel" - offset = 769536 # 751KB + 512B - size = 256K - } - - partition vfat { - partition-type = 0xC - image = "boot.vfat" - offset = 2M - } - - partition rootfs { - partition-type = 0x83 - image = "rootfs.ext4" - } -} diff --git a/board/hardkernel/odroidxu4/post-image.sh b/board/hardkernel/odroidxu4/post-image.sh deleted file mode 100755 index 025906cd09..0000000000 --- a/board/hardkernel/odroidxu4/post-image.sh +++ /dev/null @@ -1,24 +0,0 @@ -#!/bin/sh - -BOARD_DIR="$(dirname $0)" -GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg" -GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp" - -cp ${BOARD_DIR}/boot.ini ${BINARIES_DIR}/ - -# The bl1.bin.hardkernel file provided by the uboot hardkernel repository is overwritten -# by the bl2.bin.hardkernel in the sd_fusing.sh script because it is too big. -# In order to implement this in genimage, we need to truncate the bl1.bin file -# so that it does not exceed the available place. -# An issue has been filled about this: https://github.com/hardkernel/u-boot/issues/45 -truncate -s 15360 ${BINARIES_DIR}/bl1.bin.hardkernel - -rm -rf "${GENIMAGE_TMP}" - -genimage \ - --rootpath "${TARGET_DIR}" \ - --tmppath "${GENIMAGE_TMP}" \ - --inputpath "${BINARIES_DIR}" \ - --outputpath "${BINARIES_DIR}" \ - --config "${GENIMAGE_CFG}" - diff --git a/board/hardkernel/odroidxu4/readme.txt b/board/hardkernel/odroidxu4/readme.txt deleted file mode 100644 index e3cba8b0c1..0000000000 --- a/board/hardkernel/odroidxu4/readme.txt +++ /dev/null @@ -1,37 +0,0 @@ -Odroid XU-4 board with Samsung Exynos 5422 SoC - -How to build it -=============== - - $ make odroidxu4_defconfig - -Then you can edit the build options using - - $ make menuconfig - -Compile all and build rootfs image: - - $ make - -Note: you will need to have access to the network, since Buildroot will -download the packages' sources. - -Result of the build -------------------- - -After building, you should obtain all output files in output/images/ - - -How to write the SD card or eMMC -================================ - -Once the build process is finished you will have an image called "sdcard.img" -in the output/images/ directory. - -Copy the bootable "sdcard.img" onto an SD card or eMMC with "dd": - - $ sudo dd if=output/images/sdcard.img of=/dev/sdX - -Insert the SDcard into your ODROID-XU4, and power it up. Your new system -should come up now. - diff --git a/configs/odroidxu4_defconfig b/configs/odroidxu4_defconfig deleted file mode 100644 index ab819efa23..0000000000 --- a/configs/odroidxu4_defconfig +++ /dev/null @@ -1,27 +0,0 @@ -BR2_arm=y -BR2_cortex_a7=y -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y -BR2_ROOTFS_POST_IMAGE_SCRIPT="board/hardkernel/odroidxu4/post-image.sh" -BR2_LINUX_KERNEL=y -BR2_LINUX_KERNEL_CUSTOM_GIT=y -BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/hardkernel/linux.git" -BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="4.14.16-104" -BR2_LINUX_KERNEL_DEFCONFIG="odroidxu4" -BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="exynos5422-odroidxu4" -BR2_TARGET_ROOTFS_EXT2=y -BR2_TARGET_ROOTFS_EXT2_4=y -# BR2_TARGET_ROOTFS_TAR is not set -BR2_TARGET_UBOOT=y -BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y -BR2_TARGET_UBOOT_CUSTOM_GIT=y -BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/hardkernel/u-boot.git" -BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="88af53fbcef8386cb4d5f04c19f4b2bcb69e90ca" -BR2_TARGET_UBOOT_BOARD_DEFCONFIG="odroid-xu4" -BR2_TARGET_UBOOT_NEEDS_DTC=y -BR2_TARGET_UBOOT_FORMAT_DTB_BIN=y -BR2_TARGET_UBOOT_SPL=y -BR2_TARGET_UBOOT_SPL_NAME="sd_fuse/bl1.bin.hardkernel sd_fuse/bl2.bin.hardkernel.720k_uboot sd_fuse/tzsw.bin.hardkernel " -BR2_PACKAGE_HOST_DOSFSTOOLS=y -BR2_PACKAGE_HOST_GENIMAGE=y -BR2_PACKAGE_HOST_MTOOLS=y