configs/engicam_imx6*: remove defconfigs, broken
Remove numerous Engicam i.MX6 defconfigs as they don't build:
https://gitlab.com/buildroot.org/buildroot/-/jobs/11012273148
https://gitlab.com/buildroot.org/buildroot/-/jobs/11012273147
https://gitlab.com/buildroot.org/buildroot/-/jobs/11012273145
https://gitlab.com/buildroot.org/buildroot/-/jobs/11012273144
https://gitlab.com/buildroot.org/buildroot/-/jobs/11012273136
All of them are using outdated Linux kernel versions, not even LTS,
which fail to build with modern toolchains.
Unless fixes are provided, these defconfigs will be dropped.
Cc: Adam Duskett <adam.duskett@amarulasolutions.com>
Cc: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Meena Murthy <meena.murthy@amarulasolutions.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Cc: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle <arnout@rnout.be>
(cherry picked from commit 61d361c3c5)
Signed-off-by: Titouan Christophe <titouan.christophe@mind.be>
This commit is contained in:
Thomas Petazzoni
committed by
Titouan Christophe
Titouan Christophe
parent
5c23620076
commit
13eb6c293e
@@ -115,11 +115,6 @@ configs/bananapi_m2_zero_defconfig lib_defconfig.ForceCheckHash
|
|||||||
configs/broadcom_northstar_defconfig lib_defconfig.ForceCheckHash
|
configs/broadcom_northstar_defconfig lib_defconfig.ForceCheckHash
|
||||||
configs/canaan_kd233_defconfig lib_defconfig.ForceCheckHash
|
configs/canaan_kd233_defconfig lib_defconfig.ForceCheckHash
|
||||||
configs/ci20_defconfig lib_defconfig.ForceCheckHash
|
configs/ci20_defconfig lib_defconfig.ForceCheckHash
|
||||||
configs/engicam_imx6qdl_icore_defconfig lib_defconfig.ForceCheckHash
|
|
||||||
configs/engicam_imx6qdl_icore_qt5_defconfig lib_defconfig.ForceCheckHash
|
|
||||||
configs/engicam_imx6qdl_icore_rqs_defconfig lib_defconfig.ForceCheckHash
|
|
||||||
configs/engicam_imx6ul_geam_defconfig lib_defconfig.ForceCheckHash
|
|
||||||
configs/engicam_imx6ul_isiot_defconfig lib_defconfig.ForceCheckHash
|
|
||||||
configs/freescale_p1025twr_defconfig lib_defconfig.ForceCheckHash
|
configs/freescale_p1025twr_defconfig lib_defconfig.ForceCheckHash
|
||||||
configs/freescale_t1040d4rdb_defconfig lib_defconfig.ForceCheckHash
|
configs/freescale_t1040d4rdb_defconfig lib_defconfig.ForceCheckHash
|
||||||
configs/freescale_t2080_qds_rdb_defconfig lib_defconfig.ForceCheckHash
|
configs/freescale_t2080_qds_rdb_defconfig lib_defconfig.ForceCheckHash
|
||||||
|
|||||||
@@ -1471,11 +1471,6 @@ F: board/orangepi/orangepi-zero-plus2/
|
|||||||
F: board/pine64/
|
F: board/pine64/
|
||||||
F: configs/amarula_vyasa_rk3288_defconfig
|
F: configs/amarula_vyasa_rk3288_defconfig
|
||||||
F: configs/asus_tinker_rk3288_defconfig
|
F: configs/asus_tinker_rk3288_defconfig
|
||||||
F: configs/engicam_imx6qdl_icore_defconfig
|
|
||||||
F: configs/engicam_imx6qdl_icore_qt5_defconfig
|
|
||||||
F: configs/engicam_imx6qdl_icore_rqs_defconfig
|
|
||||||
F: configs/engicam_imx6ul_geam_defconfig
|
|
||||||
F: configs/engicam_imx6ul_isiot_defconfig
|
|
||||||
F: configs/olimex_a33_olinuxino_defconfig
|
F: configs/olimex_a33_olinuxino_defconfig
|
||||||
F: configs/olimex_a64_olinuxino_defconfig
|
F: configs/olimex_a64_olinuxino_defconfig
|
||||||
F: configs/orangepi_zero_plus2_defconfig
|
F: configs/orangepi_zero_plus2_defconfig
|
||||||
|
|||||||
@@ -1,39 +0,0 @@
|
|||||||
image boot.vfat {
|
|
||||||
vfat {
|
|
||||||
files = {
|
|
||||||
"uImage",
|
|
||||||
"imx6ul-geam-kit.dtb"
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
size = 64M
|
|
||||||
}
|
|
||||||
|
|
||||||
image sdcard.img {
|
|
||||||
hdimage {
|
|
||||||
}
|
|
||||||
|
|
||||||
partition SPL {
|
|
||||||
in-partition-table = "no"
|
|
||||||
image = "SPL"
|
|
||||||
offset = 1K
|
|
||||||
}
|
|
||||||
|
|
||||||
partition u-boot-dtb {
|
|
||||||
in-partition-table = "no"
|
|
||||||
image = "u-boot-dtb.img"
|
|
||||||
offset = 69K
|
|
||||||
}
|
|
||||||
|
|
||||||
partition boot {
|
|
||||||
partition-type = 0xC
|
|
||||||
bootable = "true"
|
|
||||||
image = "boot.vfat"
|
|
||||||
offset = 8M
|
|
||||||
}
|
|
||||||
|
|
||||||
partition rootfs {
|
|
||||||
partition-type = 0x83
|
|
||||||
image = "rootfs.ext2"
|
|
||||||
}
|
|
||||||
}
|
|
||||||
@@ -1,66 +0,0 @@
|
|||||||
********************************************
|
|
||||||
Buildroot for Engicam GEAM6UL SOM platforms:
|
|
||||||
********************************************
|
|
||||||
|
|
||||||
This file documents the Buildroot support for all Engicam GEAM6UL
|
|
||||||
SOM platform boards.
|
|
||||||
|
|
||||||
GEAM6UL SOM Starter kits:
|
|
||||||
https://www.engicam.com/vis-prod/101115
|
|
||||||
|
|
||||||
This configuration uses U-Boot mainline and kernel mainline.
|
|
||||||
|
|
||||||
Build
|
|
||||||
=====
|
|
||||||
|
|
||||||
First, configure Buildroot for the Engicam GEAM6UL SOM:
|
|
||||||
|
|
||||||
- for GEAM6UL SOM:
|
|
||||||
|
|
||||||
make engicam_imx6ul_geam_defconfig
|
|
||||||
|
|
||||||
Build all components:
|
|
||||||
|
|
||||||
make
|
|
||||||
|
|
||||||
You will find the following files in output/images/:
|
|
||||||
- imx6ul-geam-kit.dtb
|
|
||||||
- rootfs.ext4
|
|
||||||
- rootfs.tar
|
|
||||||
- sdcard.img
|
|
||||||
- SPL
|
|
||||||
- u-boot-dtb.img
|
|
||||||
- uImage
|
|
||||||
|
|
||||||
Create a bootable SD card
|
|
||||||
=========================
|
|
||||||
|
|
||||||
To determine the device associated to the SD card have a look in the
|
|
||||||
/proc/partitions file:
|
|
||||||
|
|
||||||
cat /proc/partitions
|
|
||||||
|
|
||||||
Buildroot prepares a bootable "sdcard.img" image in the output/images/
|
|
||||||
directory, ready to be dumped on a SD card. Launch the following
|
|
||||||
command as root:
|
|
||||||
|
|
||||||
dd if=output/images/sdcard.img of=/dev/<your-sd-device>
|
|
||||||
sync
|
|
||||||
|
|
||||||
*** WARNING! This will destroy all the card content. Use with care! ***
|
|
||||||
|
|
||||||
For details about the medium image layout, see the definition in
|
|
||||||
board/engicam/geam6ul/genimage.cfg
|
|
||||||
|
|
||||||
Boot the GEAM6UL boards with SD boot:
|
|
||||||
====================================
|
|
||||||
|
|
||||||
To boot your newly created system:
|
|
||||||
- insert the SD card in the SD slot of the board;
|
|
||||||
- connect 3-wire RS232 serial port J28 on board, and connect with other
|
|
||||||
serial end or USB cable(if serial-to-usb converter used) using
|
|
||||||
a terminal emulator at 115200 bps, 8n1;
|
|
||||||
- close JM3 for sd boot.
|
|
||||||
- power on the board.
|
|
||||||
|
|
||||||
Enjoy!
|
|
||||||
@@ -1,42 +0,0 @@
|
|||||||
image boot.vfat {
|
|
||||||
vfat {
|
|
||||||
files = {
|
|
||||||
"uImage",
|
|
||||||
"imx6dl-icore.dtb",
|
|
||||||
"imx6q-icore.dtb",
|
|
||||||
"imx6q-icore-ofcap10.dtb",
|
|
||||||
"imx6q-icore-ofcap12.dtb"
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
size = 64M
|
|
||||||
}
|
|
||||||
|
|
||||||
image sdcard.img {
|
|
||||||
hdimage {
|
|
||||||
}
|
|
||||||
|
|
||||||
partition SPL {
|
|
||||||
in-partition-table = "no"
|
|
||||||
image = "SPL"
|
|
||||||
offset = 1K
|
|
||||||
}
|
|
||||||
|
|
||||||
partition u-boot-dtb {
|
|
||||||
in-partition-table = "no"
|
|
||||||
image = "u-boot-dtb.img"
|
|
||||||
offset = 69K
|
|
||||||
}
|
|
||||||
|
|
||||||
partition boot {
|
|
||||||
partition-type = 0xC
|
|
||||||
bootable = "true"
|
|
||||||
image = "boot.vfat"
|
|
||||||
offset = 8M
|
|
||||||
}
|
|
||||||
|
|
||||||
partition rootfs {
|
|
||||||
partition-type = 0x83
|
|
||||||
image = "rootfs.ext2"
|
|
||||||
}
|
|
||||||
}
|
|
||||||
@@ -1,4 +0,0 @@
|
|||||||
# Currently kernel mainline exhibits issues when running cpufreq as ondemand
|
|
||||||
# governor on mx6.
|
|
||||||
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
|
|
||||||
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
|
|
||||||
@@ -1,93 +0,0 @@
|
|||||||
*********************************************
|
|
||||||
Buildroot for Engicam i.CoreM6 SOM platforms:
|
|
||||||
*********************************************
|
|
||||||
|
|
||||||
This file documents the Buildroot support for Engicam i.CoreM6
|
|
||||||
platform boards.
|
|
||||||
|
|
||||||
i.CoreM6 Quad/Dual/DualLite/Solo SOM Starter kits:
|
|
||||||
https://www.engicam.com/vis-prod/101120
|
|
||||||
i.CoreM6 Quad/Dual/DualLite/Solo Open Frame 10.1 C.TOUCH kits:
|
|
||||||
https://www.engicam.com/vis-prod/101133
|
|
||||||
|
|
||||||
This configuration uses U-Boot mainline and kernel mainline.
|
|
||||||
|
|
||||||
Build
|
|
||||||
=====
|
|
||||||
|
|
||||||
First, configure Buildroot for the Engicam i.CoreM6:
|
|
||||||
|
|
||||||
make engicam_imx6qdl_icore_defconfig
|
|
||||||
|
|
||||||
Build all components:
|
|
||||||
|
|
||||||
make
|
|
||||||
|
|
||||||
You will find the following files in output/images/:
|
|
||||||
- imx6q-icore.dtb (for i.CoreM6 Quad/Dual)
|
|
||||||
- imx6dl-icore.dtb (for i.CoreM6 DualLite/Solo)
|
|
||||||
- imx6q-icore-ofcap10.dtb (for i.CoreM6 Quad/Dual ofcap 10)
|
|
||||||
- imx6q-icore-ofcap12.dtb (for i.CoreM6 Quad/Dual ofcap 12)
|
|
||||||
- rootfs.ext4
|
|
||||||
- rootfs.tar
|
|
||||||
- sdcard.img
|
|
||||||
- SPL
|
|
||||||
- u-boot-dtb.img
|
|
||||||
- uImage
|
|
||||||
|
|
||||||
Create a bootable SD card
|
|
||||||
=========================
|
|
||||||
|
|
||||||
To determine the device associated to the SD card have a look in the
|
|
||||||
/proc/partitions file:
|
|
||||||
|
|
||||||
cat /proc/partitions
|
|
||||||
|
|
||||||
Buildroot prepares a bootable "sdcard.img" image in the output/images/
|
|
||||||
directory, ready to be dumped on a SD card. Launch the following
|
|
||||||
command as root:
|
|
||||||
|
|
||||||
dd if=output/images/sdcard.img of=/dev/<your-sd-device>
|
|
||||||
sync
|
|
||||||
|
|
||||||
*** WARNING! This will destroy all the card content. Use with care! ***
|
|
||||||
|
|
||||||
For details about the medium image layout, see the definition in
|
|
||||||
board/engicam/icorem6/genimage.cfg
|
|
||||||
|
|
||||||
Boot the i.CoreM6 boards with SD boot:
|
|
||||||
=====================================
|
|
||||||
|
|
||||||
To boot your newly created system:
|
|
||||||
- insert the SD card in the SD slot of the board;
|
|
||||||
- connect 3-wire RS232 serial port J28 on board, and connect with other
|
|
||||||
serial end or USB cable(if serial-to-usb converter used) using
|
|
||||||
a terminal emulator at 115200 bps, 8n1;
|
|
||||||
- close JM3 for sd boot.
|
|
||||||
- power on the board.
|
|
||||||
|
|
||||||
Testing graphics on i.CoreM6:
|
|
||||||
============================
|
|
||||||
|
|
||||||
Build with support for Etnaviv, Qt5 and demo applications:
|
|
||||||
|
|
||||||
make engicam_imx6qdl_icore_qt5_defconfig
|
|
||||||
make
|
|
||||||
|
|
||||||
Running kmscube
|
|
||||||
# kmscube -D /dev/dri/card1
|
|
||||||
|
|
||||||
Running glmark2-es2-drm
|
|
||||||
# glmark2-es2-drm
|
|
||||||
|
|
||||||
Running Qt5 Cinematic Demo:
|
|
||||||
- for i.CoreM6 Starter Kit
|
|
||||||
# export QT_QPA_EGLFS_KMS_CONFIG=/root/imx6qdl-icore.json
|
|
||||||
- for i.CoreM6 ofcap10
|
|
||||||
# export QT_QPA_EGLFS_KMS_CONFIG=/root/imx6qdl-icore-ofcap10.json
|
|
||||||
- for i.CoreM6 ofcap12
|
|
||||||
# export QT_QPA_EGLFS_KMS_CONFIG=/root/imx6qdl-icore-ofcap12.json
|
|
||||||
|
|
||||||
# CinematicExperience-demo
|
|
||||||
|
|
||||||
Enjoy!
|
|
||||||
@@ -1,11 +0,0 @@
|
|||||||
{
|
|
||||||
"device": "/dev/dri/card1",
|
|
||||||
"hwcursor": false,
|
|
||||||
"pbuffers": true,
|
|
||||||
"outputs": [
|
|
||||||
{
|
|
||||||
"name": "LVDS1",
|
|
||||||
"mode": "1280x800"
|
|
||||||
}
|
|
||||||
]
|
|
||||||
}
|
|
||||||
@@ -1,11 +0,0 @@
|
|||||||
{
|
|
||||||
"device": "/dev/dri/card1",
|
|
||||||
"hwcursor": false,
|
|
||||||
"pbuffers": true,
|
|
||||||
"outputs": [
|
|
||||||
{
|
|
||||||
"name": "LVDS1",
|
|
||||||
"mode": "1280x480"
|
|
||||||
}
|
|
||||||
]
|
|
||||||
}
|
|
||||||
@@ -1,11 +0,0 @@
|
|||||||
{
|
|
||||||
"device": "/dev/dri/card1",
|
|
||||||
"hwcursor": false,
|
|
||||||
"pbuffers": true,
|
|
||||||
"outputs": [
|
|
||||||
{
|
|
||||||
"name": "LVDS1",
|
|
||||||
"mode": "800x480"
|
|
||||||
}
|
|
||||||
]
|
|
||||||
}
|
|
||||||
@@ -1,40 +0,0 @@
|
|||||||
image boot.vfat {
|
|
||||||
vfat {
|
|
||||||
files = {
|
|
||||||
"uImage",
|
|
||||||
"imx6dl-icore-rqs.dtb",
|
|
||||||
"imx6q-icore-rqs.dtb"
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
size = 64M
|
|
||||||
}
|
|
||||||
|
|
||||||
image sdcard.img {
|
|
||||||
hdimage {
|
|
||||||
}
|
|
||||||
|
|
||||||
partition SPL {
|
|
||||||
in-partition-table = "no"
|
|
||||||
image = "SPL"
|
|
||||||
offset = 1K
|
|
||||||
}
|
|
||||||
|
|
||||||
partition u-boot-dtb {
|
|
||||||
in-partition-table = "no"
|
|
||||||
image = "u-boot-dtb.img"
|
|
||||||
offset = 69K
|
|
||||||
}
|
|
||||||
|
|
||||||
partition boot {
|
|
||||||
partition-type = 0xC
|
|
||||||
bootable = "true"
|
|
||||||
image = "boot.vfat"
|
|
||||||
offset = 8M
|
|
||||||
}
|
|
||||||
|
|
||||||
partition rootfs {
|
|
||||||
partition-type = 0x83
|
|
||||||
image = "rootfs.ext2"
|
|
||||||
}
|
|
||||||
}
|
|
||||||
@@ -1,69 +0,0 @@
|
|||||||
*************************************************
|
|
||||||
Buildroot for Engicam i.CoreM6 RQS SOM platforms:
|
|
||||||
*************************************************
|
|
||||||
|
|
||||||
This file documents the Buildroot support for Engicam i.CoreM6 RQS
|
|
||||||
SOM platform boards.
|
|
||||||
|
|
||||||
i.CoreM6 Quad/Dual/DualLite/Solo RQS SOM Starter kits:
|
|
||||||
https://www.engicam.com/vis-prod/101124
|
|
||||||
|
|
||||||
This configuration uses U-Boot mainline and kernel mainline.
|
|
||||||
|
|
||||||
Build
|
|
||||||
=====
|
|
||||||
|
|
||||||
First, configure Buildroot for the Engicam i.CoreM6 RQS:
|
|
||||||
|
|
||||||
- for i.CoreM6 RQS Quad/Dual/DualLite/Solo:
|
|
||||||
|
|
||||||
make engicam_imx6qdl_icore_rqs_defconfig
|
|
||||||
|
|
||||||
Build all components:
|
|
||||||
|
|
||||||
make
|
|
||||||
|
|
||||||
You will find the following files in output/images/:
|
|
||||||
- for i.CoreM6 Quad/Dual RQS:
|
|
||||||
- imx6q-icore-rqs.dtb
|
|
||||||
- for i.CoreM6 DualLite/Solo RQS:
|
|
||||||
- imx6dl-icore-rqs.dtb
|
|
||||||
- rootfs.ext4
|
|
||||||
- rootfs.tar
|
|
||||||
- sdcard.img
|
|
||||||
- SPL
|
|
||||||
- u-boot-dtb.img
|
|
||||||
- uImage
|
|
||||||
|
|
||||||
Create a bootable SD card
|
|
||||||
=========================
|
|
||||||
|
|
||||||
To determine the device associated to the SD card have a look in the
|
|
||||||
/proc/partitions file:
|
|
||||||
|
|
||||||
cat /proc/partitions
|
|
||||||
|
|
||||||
Buildroot prepares a bootable "sdcard.img" image in the output/images/
|
|
||||||
directory, ready to be dumped on a SD card. Launch the following
|
|
||||||
command as root:
|
|
||||||
|
|
||||||
dd if=output/images/sdcard.img of=/dev/<your-sd-device>
|
|
||||||
sync
|
|
||||||
|
|
||||||
*** WARNING! This will destroy all the card content. Use with care! ***
|
|
||||||
|
|
||||||
For details about the medium image layout, see the definition in
|
|
||||||
board/engicam/icorem6_rqs/genimage.cfg
|
|
||||||
|
|
||||||
Boot the i.CoreM6 RQS boards with SD boot:
|
|
||||||
=========================================
|
|
||||||
|
|
||||||
To boot your newly created system:
|
|
||||||
- insert the SD card in the SD slot of the board;
|
|
||||||
- connect 3-wire RS232 serial port J7 on board, and connect with other
|
|
||||||
serial end or USB cable(if serial-to-usb converter used) using
|
|
||||||
a terminal emulator at 115200 bps, 8n1;
|
|
||||||
- close JM2 for sd boot.
|
|
||||||
- power on the board.
|
|
||||||
|
|
||||||
Enjoy!
|
|
||||||
@@ -1,39 +0,0 @@
|
|||||||
image boot.vfat {
|
|
||||||
vfat {
|
|
||||||
files = {
|
|
||||||
"uImage",
|
|
||||||
"imx6ul-isiot-emmc.dtb"
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
size = 64M
|
|
||||||
}
|
|
||||||
|
|
||||||
image sdcard.img {
|
|
||||||
hdimage {
|
|
||||||
}
|
|
||||||
|
|
||||||
partition SPL {
|
|
||||||
in-partition-table = "no"
|
|
||||||
image = "SPL"
|
|
||||||
offset = 1K
|
|
||||||
}
|
|
||||||
|
|
||||||
partition u-boot-dtb {
|
|
||||||
in-partition-table = "no"
|
|
||||||
image = "u-boot-dtb.img"
|
|
||||||
offset = 69K
|
|
||||||
}
|
|
||||||
|
|
||||||
partition boot {
|
|
||||||
partition-type = 0xC
|
|
||||||
bootable = "true"
|
|
||||||
image = "boot.vfat"
|
|
||||||
offset = 8M
|
|
||||||
}
|
|
||||||
|
|
||||||
partition rootfs {
|
|
||||||
partition-type = 0x83
|
|
||||||
image = "rootfs.ext2"
|
|
||||||
}
|
|
||||||
}
|
|
||||||
@@ -1,66 +0,0 @@
|
|||||||
********************************************
|
|
||||||
Buildroot for Engicam Is.IoT SOM platforms:
|
|
||||||
********************************************
|
|
||||||
|
|
||||||
This file documents the Buildroot support for all Engicam Is.IoT MX6UL
|
|
||||||
SOM platform boards.
|
|
||||||
|
|
||||||
Is.IoT MX6UL SOM Starter kits:
|
|
||||||
https://www.engicam.com/vis-prod/101122
|
|
||||||
|
|
||||||
This configuration uses U-Boot mainline and kernel mainline.
|
|
||||||
|
|
||||||
Build
|
|
||||||
=====
|
|
||||||
|
|
||||||
First, configure Buildroot for the Engicam Is.IoT MX6UL SOM:
|
|
||||||
|
|
||||||
- for Is.IoT MX6UL SOM:
|
|
||||||
|
|
||||||
make engicam_imx6ul_isiot_defconfig
|
|
||||||
|
|
||||||
Build all components:
|
|
||||||
|
|
||||||
make
|
|
||||||
|
|
||||||
You will find the following files in output/images/:
|
|
||||||
- imx6ul-isiot-emmc.dtb
|
|
||||||
- rootfs.ext4
|
|
||||||
- rootfs.tar
|
|
||||||
- sdcard.img
|
|
||||||
- SPL
|
|
||||||
- u-boot-dtb.img
|
|
||||||
- uImage
|
|
||||||
|
|
||||||
Create a bootable SD card
|
|
||||||
=========================
|
|
||||||
|
|
||||||
To determine the device associated to the SD card have a look in the
|
|
||||||
/proc/partitions file:
|
|
||||||
|
|
||||||
cat /proc/partitions
|
|
||||||
|
|
||||||
Buildroot prepares a bootable "sdcard.img" image in the output/images/
|
|
||||||
directory, ready to be dumped on a SD card. Launch the following
|
|
||||||
command as root:
|
|
||||||
|
|
||||||
dd if=output/images/sdcard.img of=/dev/<your-sd-device>
|
|
||||||
sync
|
|
||||||
|
|
||||||
*** WARNING! This will destroy all the card content. Use with care! ***
|
|
||||||
|
|
||||||
For details about the medium image layout, see the definition in
|
|
||||||
board/engicam/isiot/genimage.cfg
|
|
||||||
|
|
||||||
Boot the Is.IoT MX6UL boards with SD boot:
|
|
||||||
=========================================
|
|
||||||
|
|
||||||
To boot your newly created system:
|
|
||||||
- insert the SD card in the SD slot of the board;
|
|
||||||
- connect 3-wire RS232 serial port J28 on board, and connect with other
|
|
||||||
serial end or USB cable(if serial-to-usb converter used) using
|
|
||||||
a terminal emulator at 115200 bps, 8n1;
|
|
||||||
- close JM3 for sd boot.
|
|
||||||
- power on the board.
|
|
||||||
|
|
||||||
Enjoy!
|
|
||||||
@@ -1,33 +0,0 @@
|
|||||||
BR2_arm=y
|
|
||||||
BR2_cortex_a9=y
|
|
||||||
BR2_ARM_ENABLE_NEON=y
|
|
||||||
BR2_ARM_ENABLE_VFP=y
|
|
||||||
BR2_ARM_FPU_VFPV3=y
|
|
||||||
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y
|
|
||||||
BR2_TARGET_GENERIC_ISSUE="Welcome to Engicam i.CoreM6 Quad/Dual/DualLite/Solo"
|
|
||||||
BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3"
|
|
||||||
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
|
|
||||||
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/engicam/icorem6/genimage.cfg"
|
|
||||||
BR2_LINUX_KERNEL=y
|
|
||||||
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
|
|
||||||
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0"
|
|
||||||
BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
|
|
||||||
BR2_LINUX_KERNEL_UIMAGE=y
|
|
||||||
BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000"
|
|
||||||
BR2_LINUX_KERNEL_DTS_SUPPORT=y
|
|
||||||
BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6dl-icore imx6q-icore imx6q-icore-ofcap10 imx6q-icore-ofcap12"
|
|
||||||
BR2_TARGET_ROOTFS_EXT2=y
|
|
||||||
BR2_TARGET_ROOTFS_EXT2_4=y
|
|
||||||
BR2_TARGET_UBOOT=y
|
|
||||||
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
|
|
||||||
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
|
|
||||||
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01"
|
|
||||||
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx6qdl_icore_mmc"
|
|
||||||
BR2_TARGET_UBOOT_NEEDS_DTC=y
|
|
||||||
BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
|
|
||||||
BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y
|
|
||||||
BR2_TARGET_UBOOT_SPL=y
|
|
||||||
BR2_TARGET_UBOOT_SPL_NAME="SPL"
|
|
||||||
BR2_PACKAGE_HOST_DOSFSTOOLS=y
|
|
||||||
BR2_PACKAGE_HOST_GENIMAGE=y
|
|
||||||
BR2_PACKAGE_HOST_MTOOLS=y
|
|
||||||
@@ -1,60 +0,0 @@
|
|||||||
BR2_arm=y
|
|
||||||
BR2_cortex_a9=y
|
|
||||||
BR2_ARM_ENABLE_NEON=y
|
|
||||||
BR2_ARM_ENABLE_VFP=y
|
|
||||||
BR2_ARM_FPU_VFPV3=y
|
|
||||||
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_13=y
|
|
||||||
BR2_TOOLCHAIN_BUILDROOT_CXX=y
|
|
||||||
BR2_TARGET_GENERIC_ISSUE="Welcome to Engicam i.CoreM6 Quad/Dual/DualLite/Solo"
|
|
||||||
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
|
|
||||||
BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3"
|
|
||||||
BR2_ROOTFS_OVERLAY="board/engicam/icorem6/rootfs_overlay"
|
|
||||||
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
|
|
||||||
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/engicam/icorem6/genimage.cfg"
|
|
||||||
BR2_LINUX_KERNEL=y
|
|
||||||
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
|
|
||||||
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.13"
|
|
||||||
BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
|
|
||||||
BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/engicam/icorem6/linux_qt5.fragment"
|
|
||||||
BR2_LINUX_KERNEL_UIMAGE=y
|
|
||||||
BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000"
|
|
||||||
BR2_LINUX_KERNEL_DTS_SUPPORT=y
|
|
||||||
BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6dl-icore imx6q-icore imx6q-icore-ofcap10 imx6q-icore-ofcap12"
|
|
||||||
BR2_PACKAGE_BITSTREAM_VERA=y
|
|
||||||
BR2_PACKAGE_CANTARELL=y
|
|
||||||
BR2_PACKAGE_DEJAVU=y
|
|
||||||
BR2_PACKAGE_FONT_AWESOME=y
|
|
||||||
BR2_PACKAGE_GHOSTSCRIPT_FONTS=y
|
|
||||||
BR2_PACKAGE_INCONSOLATA=y
|
|
||||||
BR2_PACKAGE_LIBERATION=y
|
|
||||||
BR2_PACKAGE_GLMARK2=y
|
|
||||||
BR2_PACKAGE_KMSCUBE=y
|
|
||||||
BR2_PACKAGE_MESA3D_DEMOS=y
|
|
||||||
BR2_PACKAGE_QT5CINEX=y
|
|
||||||
BR2_PACKAGE_QT5CINEX_HD=y
|
|
||||||
BR2_PACKAGE_MESA3D=y
|
|
||||||
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_ETNAVIV=y
|
|
||||||
BR2_PACKAGE_MESA3D_OPENGL_EGL=y
|
|
||||||
BR2_PACKAGE_MESA3D_OPENGL_ES=y
|
|
||||||
BR2_PACKAGE_QT5=y
|
|
||||||
BR2_PACKAGE_QT5BASE_OPENGL_LIB=y
|
|
||||||
BR2_PACKAGE_QT5BASE_LINUXFB=y
|
|
||||||
BR2_PACKAGE_QT5BASE_FONTCONFIG=y
|
|
||||||
BR2_PACKAGE_QT5BASE_GIF=y
|
|
||||||
BR2_PACKAGE_QT5BASE_JPEG=y
|
|
||||||
BR2_TARGET_ROOTFS_EXT2=y
|
|
||||||
BR2_TARGET_ROOTFS_EXT2_4=y
|
|
||||||
BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
|
|
||||||
BR2_TARGET_UBOOT=y
|
|
||||||
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
|
|
||||||
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
|
|
||||||
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.07"
|
|
||||||
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx6qdl_icore_mmc"
|
|
||||||
BR2_TARGET_UBOOT_NEEDS_DTC=y
|
|
||||||
BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
|
|
||||||
BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y
|
|
||||||
BR2_TARGET_UBOOT_SPL=y
|
|
||||||
BR2_TARGET_UBOOT_SPL_NAME="SPL"
|
|
||||||
BR2_PACKAGE_HOST_DOSFSTOOLS=y
|
|
||||||
BR2_PACKAGE_HOST_GENIMAGE=y
|
|
||||||
BR2_PACKAGE_HOST_MTOOLS=y
|
|
||||||
@@ -1,33 +0,0 @@
|
|||||||
BR2_arm=y
|
|
||||||
BR2_cortex_a9=y
|
|
||||||
BR2_ARM_ENABLE_NEON=y
|
|
||||||
BR2_ARM_ENABLE_VFP=y
|
|
||||||
BR2_ARM_FPU_VFPV3=y
|
|
||||||
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y
|
|
||||||
BR2_TARGET_GENERIC_ISSUE="Welcome to Engicam i.CoreM6 Quad/Dual/DualLite/Solo RQS Starter Kit"
|
|
||||||
BR2_TARGET_GENERIC_GETTY_PORT="ttymxc3"
|
|
||||||
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
|
|
||||||
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/engicam/icorem6_rqs/genimage.cfg"
|
|
||||||
BR2_LINUX_KERNEL=y
|
|
||||||
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
|
|
||||||
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0"
|
|
||||||
BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
|
|
||||||
BR2_LINUX_KERNEL_UIMAGE=y
|
|
||||||
BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000"
|
|
||||||
BR2_LINUX_KERNEL_DTS_SUPPORT=y
|
|
||||||
BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6dl-icore-rqs imx6q-icore-rqs"
|
|
||||||
BR2_TARGET_ROOTFS_EXT2=y
|
|
||||||
BR2_TARGET_ROOTFS_EXT2_4=y
|
|
||||||
BR2_TARGET_UBOOT=y
|
|
||||||
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
|
|
||||||
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
|
|
||||||
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01"
|
|
||||||
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx6qdl_icore_rqs"
|
|
||||||
BR2_TARGET_UBOOT_NEEDS_DTC=y
|
|
||||||
BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
|
|
||||||
BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y
|
|
||||||
BR2_TARGET_UBOOT_SPL=y
|
|
||||||
BR2_TARGET_UBOOT_SPL_NAME="SPL"
|
|
||||||
BR2_PACKAGE_HOST_DOSFSTOOLS=y
|
|
||||||
BR2_PACKAGE_HOST_GENIMAGE=y
|
|
||||||
BR2_PACKAGE_HOST_MTOOLS=y
|
|
||||||
@@ -1,33 +0,0 @@
|
|||||||
BR2_arm=y
|
|
||||||
BR2_cortex_a9=y
|
|
||||||
BR2_ARM_ENABLE_NEON=y
|
|
||||||
BR2_ARM_ENABLE_VFP=y
|
|
||||||
BR2_ARM_FPU_VFPV3=y
|
|
||||||
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_11=y
|
|
||||||
BR2_TARGET_GENERIC_ISSUE="Welcome to Engicam GEAM6UL Starter Kit"
|
|
||||||
BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
|
|
||||||
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
|
|
||||||
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/engicam/geam6ul/genimage.cfg"
|
|
||||||
BR2_LINUX_KERNEL=y
|
|
||||||
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
|
|
||||||
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.11.5"
|
|
||||||
BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
|
|
||||||
BR2_LINUX_KERNEL_UIMAGE=y
|
|
||||||
BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x80008000"
|
|
||||||
BR2_LINUX_KERNEL_DTS_SUPPORT=y
|
|
||||||
BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6ul-geam-kit"
|
|
||||||
BR2_TARGET_ROOTFS_EXT2=y
|
|
||||||
BR2_TARGET_ROOTFS_EXT2_4=y
|
|
||||||
BR2_TARGET_UBOOT=y
|
|
||||||
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
|
|
||||||
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
|
|
||||||
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.07-rc1"
|
|
||||||
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx6ul_geam_mmc"
|
|
||||||
BR2_TARGET_UBOOT_NEEDS_DTC=y
|
|
||||||
BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
|
|
||||||
BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y
|
|
||||||
BR2_TARGET_UBOOT_SPL=y
|
|
||||||
BR2_TARGET_UBOOT_SPL_NAME="SPL"
|
|
||||||
BR2_PACKAGE_HOST_DOSFSTOOLS=y
|
|
||||||
BR2_PACKAGE_HOST_GENIMAGE=y
|
|
||||||
BR2_PACKAGE_HOST_MTOOLS=y
|
|
||||||
@@ -1,33 +0,0 @@
|
|||||||
BR2_arm=y
|
|
||||||
BR2_cortex_a9=y
|
|
||||||
BR2_ARM_ENABLE_NEON=y
|
|
||||||
BR2_ARM_ENABLE_VFP=y
|
|
||||||
BR2_ARM_FPU_VFPV3=y
|
|
||||||
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_0=y
|
|
||||||
BR2_TARGET_GENERIC_ISSUE="Welcome to Engicam Is.IoT eMMC Starter Kit"
|
|
||||||
BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
|
|
||||||
BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
|
|
||||||
BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/engicam/isiot/genimage.cfg"
|
|
||||||
BR2_LINUX_KERNEL=y
|
|
||||||
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
|
|
||||||
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.0"
|
|
||||||
BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
|
|
||||||
BR2_LINUX_KERNEL_UIMAGE=y
|
|
||||||
BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x80008000"
|
|
||||||
BR2_LINUX_KERNEL_DTS_SUPPORT=y
|
|
||||||
BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6ul-isiot-emmc"
|
|
||||||
BR2_TARGET_ROOTFS_EXT2=y
|
|
||||||
BR2_TARGET_ROOTFS_EXT2_4=y
|
|
||||||
BR2_TARGET_UBOOT=y
|
|
||||||
BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
|
|
||||||
BR2_TARGET_UBOOT_CUSTOM_VERSION=y
|
|
||||||
BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2019.01"
|
|
||||||
BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imx6ul_isiot_emmc"
|
|
||||||
BR2_TARGET_UBOOT_NEEDS_DTC=y
|
|
||||||
BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
|
|
||||||
BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y
|
|
||||||
BR2_TARGET_UBOOT_SPL=y
|
|
||||||
BR2_TARGET_UBOOT_SPL_NAME="SPL"
|
|
||||||
BR2_PACKAGE_HOST_DOSFSTOOLS=y
|
|
||||||
BR2_PACKAGE_HOST_GENIMAGE=y
|
|
||||||
BR2_PACKAGE_HOST_MTOOLS=y
|
|
||||||
Reference in New Issue
Block a user